BYKQF - 245-10 A9158 ALP 10
- MSDS: BYKQF
- Manufacturer: SIGMA CHEMICAL COMPANY
- Product Name: 245-10 A9158 ALP 10
- National Stock Number: 6550-00F044639
Product Identification
Product ID:245-10 A9158 ALP 10
MSDS Date:08/08/1995
FSC:6550
NIIN:00F044639
Kit Part:Y
MSDS Number: BYKQF
Responsible Party
SAINT LOUIS, MO 63178-5000
US
Emergency Phone: 314-771-5765/800-325-3010
Info Phone: 314-771-5765/800-325-3010
Cage: 21076
Contractor
Telephone: 314-771-5765
Cage: 21076
Ingredients
ALP 10
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION/SKIN ABSORPTION. MAY CAUSE IRRITATION. PROLONGED/REPEATED
EXPOSURE MAY CAUSE ALLERGIC REACTIONS IN CERTAIN INDIVIDUALS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
First Aid
First Aid:INGESTION: WASH OUT MOUTH W/WATER IF CONSCIOUS. SKIN: FLUSH
W/COPIOUS AMOUNTS OF WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH
AIR. EYES: FLUSH W/COPIOUS AMOUNTS OF WATER FOR 15 MINS. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER/APPROPRIATE
FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PREVENT CONTACT W/SKIN & EYES.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SWEEP UP, PLACE IN
A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA
& WASH SITE AFTER MATERIAL PICKUP IS COMPLETE.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. WEAR
PROTECTIVE CLOTHING & EQUIPMENT.
Other Precautions:PREVENT CONTACT W/SKIN & EYES & INHALATION.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA-APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST
Protective Gloves:CHEMICAL-RESISTANT
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Appearance and Odor:SOLID
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT
Disposal
Waste Disposal Methods:DISSOLVE/MIX THE MATERIAL W/A COMBUSTIBLE
SOLVENT & BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AN AFTERBURNER
& SCRUBBER IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.